User manual

Intellibox Basic

Quick Basic Setting

Normally the configuration of the Intellibox is changed during the

operation using the "Basic Settings" menu. Start the Intellibox while

holding the E key gives direct access to the most important menu

options which can be selected and changed.

The display always indicates the active mode, with new units at

factory settings. The D-key can be used to scroll through the

individual menu options. Pressing the E-key will confirm the

entries shown on the display.

The Intellibox starts with the following display:

This menu disappears automatically after 2 seconds. Then the

display shows system’s software version number and the serial

number of the Intellibox, e.g.:

The basic configuration of the Intellibox can now be queried and

changed.

Pressing the E-key takes you to the first item:

Menu option "configuration"

This menu option can return the Intellibox to its factory default.

Now there are further options:

1. Do not reset the configuration

• Press E-key to continue to the next option menu

2. Reset the configuration

• Press D-key until the display changes to "= reset.: yes "

• Press E-key and hold for a system reset to its factory settings

and restart in the configuration mode.

3. Reset the configuration and return to control panel operation

• Press D-key until the display changes to "= reset.: yes "

• Press E-key

The Intellibox will do a system reset to factory settings and restarts

in the control panel operating mode.