Instructions / Assembly

I
I
M
The headrest has three heights to adjust, and the
height of the headrest can be adjusted according to
your needs. Lift or press the headrest into the desired
gear. If the metal dowel brings out the plastic core in
the hole during the adjustment process, this is
because the metal cover above the assembly hole is
not tightened, you only need to remove the plastic part
from the metal dowel, insert the small head downward
into the hole, and then tighten the metal cover.
ARM CHAIR L+R
One hook in each seat spare parts bag
There are two metal hooks connectors inside the carton of the left
and right unilateral sofa, and if you are using a unilateral sofa, this
hook is not useful.lf you need to use the left and right unilateral sofa
together, please place the bottom of the left and right sofa upward on
a clean plane before the rod pillow at the top of the back is inserted,
align the left and right unilateral sofa before and after and try to keep
it close, use the metal hook in the packing box, seize the combined
sofa 20 cm away from the front and back of the sofa, and then
tighten the screw.Turn the assembled sofa tightly together,face up,
and insert the cylindrical pillow.
Since there is a sponge on the outside of the wooden frame of the
sofa,the two parts need to be squeezed tightly when fixed with the
buckle.