SF0003
(packed in bottom of part B) (packed in bottom of part B)
M8X20 Step 1 Each screw is rotated to 30% first, and the three screws on each foot are screwed in, and then completely tightened with the allen key. Turn the seat frame B upside down on clean padded surface,Use bolt F, allen key G to attach the legs E on rear bottom of the armrest fasten all boltes to secure.
Step 2 Step 3 Squeeze firmly horizontally towards the backrest, align the metal connector, and then press firmly down until it is fully secured. Operate carefully to prevent damage to fabric fabric when metal connectors are inserted. Turn the chair base assembly upright,carefully align male and female metal brackets on both sides then push the back A all the way down to secure.
Step 4 Tidy up the sofa to make it beautiful, adjust the screws on the sofa foot, make the sofa stable, and the assembly is completed.
