Instructions / Assembly

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED

HARDWARE INCLUDED

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

Before startig installation of this fixture of

removal of a previous fixtufe ,disconnect the

power by turning off the circuit breaket of by

removing the fuse at the fuse box

Inspeclt the wire inaulation for any cuts

abrasions, or exposed copper that may have

reside during shipping it there is a defect

in the wire, do not attempt instaitation

CAUTION

Fixture

Socket Ring x 3

Shades x 3

Mounting Unit

Mounting screws 1

Wire Nuts

Mounting Screws 2 x 4pcs

Shades

Bulbs (not included)

PAGE 1
ASSEMBLY INSTRUCTIONS CAUTION Inspeclt the wire inaulation for any cuts abrasions, or exposed copper that may have reside during shipping it there is a defect in the wire, do not attempt instaitation Before startig installation of this fixture of removal of a previous fixtufe ,disconnect the power by turning off the circuit breaket of by removing the fuse at the fuse box TOOLS REQUIRED HARDWARE INCLUDED Fixture Socket Ring x 3 Shades x 3 Mounting Unit Wire Nuts Mounting screws 1 Mounting Screws
PAGE 2
INSTALLATION STEP 1 Unscrew the ball nust from the mountinig unit Use the mounting screws to attach the mounting unit to the junction box STEP 2 Make the electrical connection from the junction box to the fixturet Connect the ground wire to the mounting unit using the preinstalled green ground screw Then,connect the positive, negative and ground wires with the supplied wire unts, Secure with electrical tape Black or Red wire(hot) from the Junction box white wire(neutral) from the Junction box Bare or gr