Instructions / Assembly

INSTALLATION
STEP 2
Make the electrical connection from the junction box to the fixturet
Connect the ground wire to the mounting unit using the preinstalled green ground
screw
Then,connect the positive, negative and ground wires with the supplied wire unts,
Secure with electrical tape
Black or Red wire(hot)
from the Junction box
white wire(neutral)
from the Junction box
Sealiing tape
(not Included)
Black wire from
the fixture
White wire from
the fixture
Green Ground Screw
Groumd wire from
the fixture
Bare or green ground wire
from the Junction box
STEP 1
Unscrew the ball nust from the mountinig unit
Use the mounting screws to attach the mounting unit
to the junction box