Instructions / Assembly

Please read all installation instructions carefully.

After reviewing the following tips, if you are unable to solve

a problem, please contact customer service for additional

assistance

Fan not reponding to remote control

Check that all wire connections are secure and made as instructed.

Verify that power is on and reaching the receiver by a voltmeter.

Verify that controller batteries are installed with proper polarity as

indicated inside the battery cover

WARNING

Before servicing or cleaning your fan, switch power off at the service panel

and lock the service disconnecting means to prevent power from being

switched on accidentally.

Fan makes repetitive ticking noise

Check for obstructions in the rotor path.

Make sure mounting hardware at the ceiling is secure.

Make sure all other hardware and blade attachments are tight.

Give fan adequate "Break in Period" of several hours to several

days then repeat steps above.

Light does not work

Check wire connections at ceiling and receiver.

Confirm that LED wire leads and terminal block are properly

connected to the LED board.

Troubleshooting