Installation Guide

INSTALLATION
1. Prepare for installation by installing wood blocking
between the two studs where the faucet will mount.
The valve should be installed 2" behind the finished wall.
Important: Take into consideration the thickness of
your finished wall materials, such as a tile backsplash. If
your valve is installed too far behind your finished wall,
you may be left with insufficient clearance to attach the
spout and handles.
2. Mount the rough-in valve into its prepared location.
Attach the valve body using the provided hardware. Use
a level to ensure that the valve is mounted completely
level.
Important: Leave the protective plastic sleeves on the
valve until your finished wall is completed.
3. Attach your existing water lines to the valve. Apply
thread sealant or plumber’s tape to the threaded
connection to ensure a watertight seal.
Hot Water
Cold Water
Wood blocking
between studs
Protective covers
enlarged view
WAL
L-MOUNT FAUCET
Wall-Mount Faucet Installation Instructions