BEFORE INSTALLATION 5 SORE Give bin Gobbet turned on or off independently by the switch : Canon button, and the water temperature can be 3 ay adjusted by the constant temperature hand wheel Fo on the Eight. EE Notes 1. The valve core of the main body has been tested and adjusted by the manufacturer Please do not disassemble and install it by yourself. Hohhot water temperature 55:80 1 (recommended 65 0) cold water temperature 5:28 °C (recommended 15 C1 3.
INSTALL THE SHOWER VALVE BODY SERER 3 : This product has Been inspector and a debugged by the fictive to the best : condition. Please do not assailable : and assemble it yourself. No 1. Accerding to the basic size of the product {with reference lo the figure above), the per-embedded grooves of main bad, inlets of hot and cold water and mixed water sutlers and joints should be excavated.
INSTALL THE SHOWER VALVE BODY 7. First, takeout the color button of the constant temperature handstand: then loosen the main body of the handheld counterclockwise with the hexagon wrench, and unload it. Du not rotate the inconstant temperature hand wheel when kiting it oul. Ensure that the button of the constant temperature hand wheel is aligned with the 38-degree line of the panel. Exes part of extension rod Lean tightly against the wall SE a Fn Positioning plate 8.
INSTALLATION OF OF RAIN SHOWER HEAD Paris list Sketchy diagram mor ae stir [Nome cai 1 responsive bat 4 | 8 workspace | 4 3 pacer 517 [ood 4 A [ioe of sortieing 2 8 acs: 6 shiver 4 4 [ese 1 8 |e semi 2 5 [per 4 | Hf [Demesnes |g 1. When customer receives the 2. Then separate the parts of the product, loosen the MERE screw with shower head from the per-burying an Allen key as shown above. main Body.
FINISHED CLEANING CARE 1.To keep the surface of the product clean and bright, please wash it frequently. A Rinse with water and dry with soft colon cloth. B, Do not Use abrasive detergent, emery cloth and sandpaper. C, Do not use any acid cleaner, polish, soap, coarse detergent. abrasive polish. 2.
