Bar Stools
P i
PART A Left Arm 2pcs B Right Arm 2pcs C Seat Panel 2pcs D Back Panel 2pcs E Leg E 2pcs F Leg F 2pcs G Footrest 2pcs Bolt M6*25 8pcs Bolt M6*30 16pcs Bolt M6*35 8pcs H M6*25 I M6*30 J M6*35 1
PART K M6*55 Bolt M6*55 8pcs L Washer 72pcs M Nut 24pcs N Bolt Cap 24pcs O Nut Cap 8pcs P Allen Key 1pc Q Wrench 1pc R Swivel Plate 2pcs 2
EXTRA H M6*25 Bolt M6*25 1pc I M6*30 Bolt M6*30 1pc J Bolt M6*35 1pc M6*35 Bolt M6*55 1pc L Washer 4pcs M Nut 1pc N Bolt Cap 1pc O Nut Cap 1pc K M6*55 3
STEP1 Attach footrest(G) to legs (E,F) using bolts M6*55(K), washers(L), bolt caps(N), nuts (M) and nut caps(O). Please do not fully tighten all bolts until unit is fully assembled. L M O E LK G F STEP2 Attach swivel plate(R) to seat panel(C) using bolts M6*25 (H), washers (L) and nuts (M). Attach seat panel(C) to legs using bolts M6*35 (J), washers (L) and nuts(M). Please do not fully tighten all bolts until unit is fully assembled.
STEP3 Attach arms (A,B) to seat panel using bolts M6*30(I), washers (L) and bolt caps(N). Please do not fully tighten all bolts until unit is fully assembled. A B L I N STEP4 Attach the back panel (D) to arms using bolts M6*30 (I), washers (L) and bolt caps(N). Please fully tighten all bolts using allen key (P) and wrench (Q) at this time.
Cleaning and Maintenance Clean frame with mild soapy water, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid, or other solvents on the fabric and metal parts. We recommend the use of furniture covers to protect the Bar Chair when not in use. Inspect and tighten all bolts on a regular basis to ensure proper performance and safety. In order to prolong the life and beauty of your Bar Chair,we recommend storing it in a dry and protective area during off season periods.