® www.kocom.co.kr User’s Manual This User s Manual describes the correct use of KOCOM DIGITAL CAMERA KDC330. Please read carefully all instructions in this User s Manual before using the camera. ®2003 KOCOM Co., Ltd. All rights reserved. Ulead Logo is a registered trademark of Ulead. Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective owners.
Warranty Before Using the Camera Warranty Time Period Kocom Warrants this camera to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Warranty Repair Coverage This product is manufactured through rigid quality control and test processes. In case this product is defective, it will be replaced or repaired free of charge for one year after purchasing date.
Features of KDC330 ● Superb high quality images of 3.34 mega pixel ● mages up to 2040x1530 pixel resolution Contents 1 Cautions ● High performance 1.
● Setting Basic Playback Mode 5 Playback ● Picture Playback ● Zoom In ● Viewing with Multi 6 screens ● DPOF 6 Delete ● Delete pictures ● Delete all ● Cancellation of Protect Setting 7 Application (Setting by modes) ● Still Automatic Capture Mode - Basic Capture - Menu Setup ● Still Manual Capture Mode - Basic Capture - Menu Setup ● Still Continuous Capture Mode - Basic Capture - Menu Setup ● Motion (movie) capture mode - Basic playback - Menu setup ● Playback mode - Basic playback - Slide show - Menu s
Cautions Safety caution ● Be careful while wearing the camera strap or the USB cable around your neck. ● Do not use the optical viewfinder to look directly at the sun or any source of intense light. ● Do not put the camera in a place under intense direct light or in the sealed car during the summer. The image sensor may be discolored and deteriorated, if you l eave the lens towards a direct sunlight for a long period of time.
Before using the camera Side Shutter Button Power Button Name of Each Part View Finder Front USB Port Flash (p.19) Video Port Adaptor Port Lens lever Picture Size LCD Panel Lens Resolution Hand Shaking Prevention Back Viewfinder LCD Panel AF/Flash indicator (Power indicator) (Capture Info. Indication) Del.
Using manipulation buttons W T Attaching the Strap Wide/Tele Button: Adjusts optical/digital zoom of the lens. Wide: Zoom Out / Tele: Zoom In OK OK Button: Saves the setting selected in the camera menu. MENU Menu Button: Goes to Menu mode adjusting manipulation/ setting of the camera. DISP/DPOF Display: Turns off or on the LCD in front of the camera.
� Press OPEN and slide the battery compartment cover in the direction of the � � arrow, then lift the cover. Place the batteries in the compartment as indicated by the polarity symbols marked inside. Replace the cover. Batteries in use ● A chargeable (Nickel hydrogen battery) battery is recommended for KDC330. ● Batteries for KDC330. - Chargeable (Nickel hydrogen battery) battery: AA size ● Use only fresh batteries of the required size and recommended type.
Inserting a Memory Card ● The CompactFlash™ Card (memory card) is removable and reusable for easy storage and transfer of your pictures. ● You must insert a memory card into the camera before you take pictures. Removing a Memory Card � After checking whether or not the camera is switched off, open the slot cover by pulling down the C/F open knob under the strap mount. � By pushing the Eject button under the Memory Card and push the Memory Card out. � Remove the memory card and close the cover.
C/F Card Format Getting Ready Switching On and Off ● To use the C/F Card for the first time, you need to format the C/F Card. ● Switching On: The LCD panel is turned on, when you press the Power button. ● Switching Off: The LCD panel is turned off, when you press the Power button � while the power is turned on. Set the location of the Mode Selection Dial Playback mode. . to Power Button � L ML T HQ Press the Menu button, then format the card through the Direction key.
Normal Shooting ◎ Even though you purchase a new C/F card, you need to format the card when you use it at the initial stage. Power button Checking Battery Capacity Indication T L ML HQ EV 0/3 When the power is supplied to the camera, you can see an indication in the shape of a battery on the LCD panel. W T L ML Full — fully charged. HQ EV 0/3 low — not fully charged. Exhausted (blinking) — The Camera stop working. Replace the batteries.
� When you press gently the Shutter button halfway, the focus is set (Auto Focus). � Press the above-mentioned shutter a little harder for about 1 second. Shutter button ◎ Upon a short-distance capture, you cannot use the flash. ◎ Since the images on the View Finder and LCD are different, you need to take pictures through the LCD monitor. ◎ Upon a short-distance capture, a flash capture may damage one's eyesight, and the quality of an image may not be good.
Flash prohibition ★★ Night flash A Is used when capturing a subject at night. This makes the speed of the shutter slow along with the flash. Auto flash When the subject or background is dark, the flash of the camera is automatically activated. Red eye prevention Preliminary light is emitted before main light is emitted to prevent red eye effect. Forced flash L ML A T HQ EV 0/3 NEAR Light is emitted irrespective of dark places or bright places.
Playback Setting Basic Playback Mode T You may check still pictures or moving images in a simple way. � Power button � 2002/01/01 A T L ML 2002/01/01 A HQ EV 0/3 Zoom In W ● After playing back still pictures, you may zoom in them. ● When you press the � Switch the camera on by pressing the Power button for about 1 second. � Set the location of the Mode Selecting Dial to Playback mode. T button once, the picture is enlarged twice its size with 2X display on the top.
"D"Indication Viewing with Multi 6 Screens ● When you press the W button in mode, the stored files of the 6 screens are displayed in the LCD window. ● After selecting a desired screen by using the Direction key, press the T button to display it in full on the screen.
Application (Setting by Mode) Delete All � � � � � Press the Menu button in Still Automatic Capture Mode mode. After selecting Delete All under the Play, press once to the right. After selecting Yes, press the O K button. Basic Capture You can take pictures according to the value automatically set. Press the O K button once more, when °∞?°± appears. Power Button "No File"message appears the moment the pictures are deleted.
[Digital zoom setting] � When you gently press about half the Shutter button, the focus is automatically set (Auto focus). � Press the above-mentioned shutter a little harder for about 1 second. Shutter button RECORD MODE REC SIZE QUALITY DIGITAL TELE 1X 2X [Picture quality setting] RECORD MODE REC SIZE QUALITY HQ DIGITAL TELE SQ OK � � Menu setup OK � � � Press the Menu BUTTON for camera setup. � � Press O K , if you want to save the setup menu. Rec/More/Set menus are in the Menu window.
Set Setting ● Time/Date: Sets the current time and date on the camera. ● Card format: This function is not supported in the continuous capture mode. ● Card format: This function is not supported in the continuous capture mode. PLAY MODE SET TIME/DATE CARD FORMAT LCD BRIGHT BEEP COMPLETE ● Beep: Turns on or turns off the beep sound.
Menu Setup � � � � Press the Menu button for camera setup. Rec/More/Set menus are in the Menu window. Select a setting in each menu. When you select the Menu, use the Navigator (Direction key). Press O K , if you want to save the setup menu. When the value to set is saved, return to the reset (initial) screen by pressing the Menu button.
More Setting (Manual and Continuous Capture) ● Meter: Sets focus setting method when taking pictures. - Multi: Selects the Multi sidelights. - Center: Selects the central focused sidelight. - Spot: Selects the spot sidelight. [ISO Setting] [White Balance Setting] RECORD MODE MORE METER EV ISO WHITE BAL AUTO FOCUS RECORD MODE MORE METER EV ISO AUTO WHITE BAL 100 FOCUS 200 400 OK � ● Ev: Sets the Exposure value. � You may change from +2 to ‐2 by 1/3 step. ● ISO: Adjusts the brightness of picture.
[Time Setting] [Set Mode Setting] RECORD MODE SET TIME/DATE CARD FORMAT LCD BRIGHT - + BEEP Returning to capture mode ● Return to capture mode by pressing the Menu button O K� � YEAR MONTH DAY HOUR MIN TYPE � � 2003 01 01 01 07 YMD � TIME AND DATE ※ Specifications of AF / Flash Indicator LED AF Indicator On Flash Flickering When the AF finishes and when the Focus is not suitable by pressing the shutter halfway (taking pictures possible) Two ways On Flickering Flickering Always after finish
Still Continuous Capture Mode Basic Capture ● Refers to capturing images continuously, when you press the Shutter button. Menu setup � � Press the Menu button for camera setup. � � Press O K to save the menu ● Continuous capturing is possible until the buffer reaches the maximum In the Still Continuous Capture Mode, the use of the Flash is prohibited. Power Button T L ML HQ EV 0/3 Rec/More/Set menus are in the Menu window. Select a setting to select on each menu.
[Card Formet] More Setting PLAY MODE SET TIME/DATE CARD FORMAT CANCEL LCD BRIGHT OK? BEEP PLAY MODE SET TIME/DATE CARD FORMAT CANCEL LCD BRIGHT OK BEEP ● Meter: Sets a focus setting method when taking pictures. - Multi: Selects multi sidelights. - Center: Selects central focused sidelight. - Spot: Selects spot sidelight. ● Ev: Sets the Exposure value.
Moving Image (Movie) Capture � Press the O K button to cancel the recording itself. Shutter Basic Capture ● Function to capture moving images for a designated time (15 seconds). T MOVIE STANDBY ● 320x240 resolution in AVI mode. F MOVIE REC 01 SEC F MOVIE REC 15 SEC OK ●Capturing for about 15 seconds with 15fps is possible. Power Button STORING W E E Menu Setup T MOVIE STANDBY W � � By pressing the Power On button for about a second, this switches the camera on.
Set Setting ● Time/Date: Sets the current time and date on the camera. ● Card format: This function is not supported in continuous capture mode. ● LCD bright: Adjusts the brightness of LCD. - □ □ + Dark ● Beep: Turns on or turns off the beep sound.
Playback Mode Basic Playback You may check still pictures or moving images in a simple way. Menu Setup � � Press the Menu button for camera setup. � Press O K , if you want to save the setup menu Power Button Rec/More/Set menus are in the Menu window. Select a setting to select on each menu. When you select a menu, use the Navigator (Direction key). Play Mode ● Delete All: Deletes the entire pictures stored.
RECORD MODE SET TIME/DATE CARD FORMAT LCD BRIGHT - + BEEP TIME AND DATE � � YEAR MONTH DAY HOUR MIN TYPE � 2003 01 01 01 07 YMD � PLAY MODE PLAY DELETE ALL PROTECT ALL PROT DPOF ALL UNPROT PLAY MODE PLAY DELETE ALL PROTECT ALL PROT DPOF ALL UNPROT [Time Setting] (Set Mode Setting] O K� � [Removing Protect All] [Selecting Protect All] [Card Format] [Selecting DPOF All] OK � � PLAY MODE PLAY DELETE ALL PROTECT ALL DPOF ALL SET RESET [Removing DPOF All] PLAY MODE PLAY DELETE ALL PROTECT ALL
8.Details of Each Function Sidelight Method ● In KDC330, conversion to sidelight mode in Still Automatic Capture mode, Still Manual Capture mode and Still Continuous Capture mode is possible. ● Multi sidelights ● In KDC330, the conversion is possible in Still Automatic Capture mode, Still Manual Capture mode and Still Continuous Capture mode.
White Balance Connection to External Equipment ● Adjusts balance in line with the color of lighting surrounding the subject. Through this adjustment, a white subject is viewed as white. Connection to Computers ● In most cases, auto capture is possible. However, this mode is used when you want to fix to a specified lighting or condition. ● Conversion in Still Manual Captured mode and Motion (Movie) Capture mode is possible in KDC330.
10. Use of Software ◎ Digital Print Order Format (DPOF) Digital Print Order Format is DPOF to automatically print the images photographed through the digital camera in a printer. This is standardized print information, which enables more convenient image print. ※ Before using the camera, check whether or not the printer supports DPOF. Focus ● The types of focus are selected in Still Manual Capture mode in KDC330.
� When the camera is connected to the PC, the camera is converted to PCconnectioned mode. Then, the USB Mass Storage Driver of the camera is automatically installed in the operation system of the PC. Thus, you may use it immediately. a PC, or the pictures from the PC can be copied to the card of the camera. � The portable mobile disk provides the function of hard disk of a PC. Therefore, you may use it as you use general disks. � Open "Windows Search" to look into the contents of the camera.
Description of the Function of USB Mass Storage � � � � Installing Bundle Software Switch on the camera. Connect the camera to the USB port of a PC. When the camera is connected to the PC, the camera is converted to PC connection mode. Then, the USB Mass Storage Driver of the camera is automatically installed in the operation system of the PC. Thus, you may use it immediately.selection of the pictures taken. Installing Ulead Photo Express 4.
� � After reading the user agreement carefully, click Y (Yes), if you agree with it. After reading the user agreement carefully, click Y (Yes), if you agree with it. � Select program setting mode, then click N (Next). � Select where to put the program icon among the folders in the Start menu. Click N (Next). � When the next screen as in the figure appears, carefully read it. If you want to � Select a folder to install the Ulead Photo Express 4.0 SE Platinum.
� When the installation � Select Korean as the pertinent language, and click OK. � When installation wizard appears, click N (Next). � After reading the user agreement carefully, click Y (Yes), if you agree with it. finishes, a message "Installation Wizard has finished" appears. Finish the installation by clicking on "Finish" Installing Ulead Photo Explorer 7.0 SE Platinum � When you insert bundle CD in the CD-ROM drive, the following Ulead Photo Explorer installation screen appears.
� � � 68 Enter the user information and click N (Next). � Select a program folder to put Ulead Photo Explorer 7.0 SE Platinum icons and click N (Next). � Select country. Select currently used TV system if the selected country supports both NTSC/PAL TV system and click N (Next). In Korea, only NTSC system is used � When asked whether or not to connect the image file to the Photo Explorer, select your desired option and then click N (Next).
the image file format to the Ulead program. The installation starts when you click on N (Next). � When the installation finishes, a window saying the installation wizard has finished appears, and it asks if you want to re-start your computer. Restart your computer after saving all the data and closing all the executed programs. If you use Alt and Tab on the keyboard, you can move to the current work or executing other programs.
� Select and double click the files to be edited or saved on the � Execute edit/copy/move by selectingdesired pictures as in the same manner as the Photo Express. hard disk, or copy/move to the hard disk. The outline of the selected pictures looks different. Also, when you simultaneously select many pictures, select "Select All"in the Edit menu, or use "Ctrl" or "Shift"on the computer keyboard to use more conveniently. Downloading Pictures with Ulead Photo Explorer 7.
Camera Specifications Product Type Optical Sensor No. of Record Pixel SO Sensitivity Recording Method Quality of Image (Compression Rate) Recording Unit Resolution and Maximum No. of Frames (16MB CompactFlashTM) White Balance Lens Digital Zoom Focal Range Playback Mode Exposure Mode Shutter Speed Sidelight Mode View Finder Strobe Mode Capture Mode Self Time Sound Operating Time Playback Time 74 Optical 3x Zoom Full-automatic Digital Camera Total 3.34 mega pixel/3.24 mega efficient pixel, 1/2.
KOCOM Bldg., 260-7 Yumchang-Dong, Kangseo-Gu, Seoul, 157-040, Korea �TEL:+82-2-6675-2211 �FAX:+82-2-6675-2000 �http://www.kocom.com �E-mail:export@kocom.co.kr 2003.
