Operation Manual

ULEAD VIDEOSTUDIO USER GUIDE
110
Using the Surround Sound Mixer
Unlike stereo stream that carries only two audio channels, Surround Sound delivers
a whole lot more realism to your living room. It has five separate audio channels
encoded into one file which is delivered to five speakers and one sub-woofer
frequency effect.
The Surround Sound Mixer has all the controls to position sounds around the
listener, outputting audio through the 5.1 configuration of multiple speakers.
Using Stereo Mode
Stereo files (two channels) have two waveforms representing the left and right
channels accordingly.
To use stereo mode:
1. Click Enable/Disable 5.1 Surround in the Toolbar. Select Music Track in the
Options Panel.
2. Click Play in the Options Panel.
3. Click the music note symbol in the center of the Surround Sound Mixer. Drag it
to either right or left, depending on your preferred sound position.
4. Drag Volume to adjust the volume level of the audio.
Tip: To check if the 5.1 Surround is disabled, click Audio View in the Toolbar.
Note: Moving the note symbol will amplify the sound coming from your preferred
direction.