Operation Manual

ULEAD VIDEOSTUDIO USER GUIDE
111
Using Surround Sound
All audio channels in Surround Sound have a set of similar controls that you will
find in the stereo configuration of this panel, plus a few more specific controls.
• Six-channel VU Meter Front Left, Front Right, Center, Sub-woofer, Surround
Left, Surround Right.
• Center controls the amount of output sound from the center speaker.
• Sub-woofer controls the amount of low-frequency sound output.
To use Surround Sound mode:
1. Click Enable/Disable 5.1 Surround in the Toolbar. Repeat steps 1 and 2 in
using stereo mode.
2. Click the music note symbol in the center of the Surround Sound Mixer. This
time, drag it to any of the six channels depending on your sound position
preference.
3. Drag the Volume, Center and Sub-woofer to adjust sound controls of your
audio.
Duplicating an audio channel
Audio files sometimes separate the vocal sound from the
background audio and put them in different channels.
Duplicating an audio channel allows you to mute the
other channel. For example, the voice is on the left audio
channel and the background music on the right. When
you duplicate the right channel, it will mute the vocal part
of the song leaving the background music to play. To
duplicate an audio channel, select Duplicate audio
Tip: Sub-woofer sound is less directional than sound output from the satellite
speakers. Therefore, you can put it anywhere in the room after some experimenting.
Each living space has its own acoustics so there are no fixed rules.
Tip: You can also adjust the sound position preference of your tracks in Video,
Overlay and Voice. To do this, click your preferred track button and repeat steps 2
to 3.