Operation Manual

ULEAD VIDEOSTUDIO USER GUIDE
149
• Timecode offset: Specify a value to adjust the discrepancy between the
actual playing time of your device and the trimming marks specified in the DV
Recording dialog box. If for example you have specified the mark in timecode
for capturing and then after the process, the captured start frame is the
frame before the actual mark in timecode, you can then set a value of -4 to
correct the timing between the device and your capture board.
• Description: Displays additional information about the current device control
driver.
• Options: Opens a dialog box related to the selected current device control
driver. This button is disabled if your current device does not support
additional options. (Consult your hardware device’s manual for more
information.)
Video and Audio Capture Property Settings
Source tab
Video
• Input Source: Determines where your data comes from. Select Video
Composite if you have a video input jack and one (Mono) or two (Stereo)
audio input jacks. Select Video Tuner for TV input and Video S-video for S-
video input.
• TV system: Specify whether you like to use NTSC or PAL, depending on your
region. NTSC is predominant in North America and many Asian countries. PAL
is the television standard in Europe and South Pacific.
Audio
• Audio device: Select the audio device where you want to capture audio.
• Input source: Indicates the current sound input device. Should there be any
problems with your audio, simply check if you've selected the appropriate
sound input device from the Audio input source drop-down list.
Channel tab (TV tuner only)
• Country/Region: Determines the available channels in your place.
• TV input type: Determines the mode of your television input. Select
Antenna if you're using an antenna to watch television or Cable, if your
television utilizes a cable TV system.