Operation Manual

ULEAD VIDEOSTUDIO USER GUIDE
25
Click to automatically split video clips into smaller clips based on their
shooting date and time.
You can also click to sort clips in the Media Clip List according to their
Name or Date.
To capture video and images:
1. Connect your camcorder to your computer and turn on the device. Set it to Play
(or VTR / VCR) mode.
2. Check if your camcorder is selected in the Source list.
3. Click the Capture tab in the VideoStudio Movie Wizard.
4. Select the video file format to use for saving captured video files from the
Format list. Specify the Capture folder in which to save the files.
5. Choose Split by Scene to separate scenes in your DV video clip into several
clips based on frame content or shooting date and time.
6. Play the videotape in your camcorder, and position the tape on the part of the
video where to start capturing.
7. Click Capture Video to start capturing. Click Stop Capture or press [Esc] to
stop capturing.
8. To capture a still image from the video footage, pause the video on the desired
image then click Capture Image.
9. Click Enable/Disable Audio Preview to play or stop DV audio preview while
capturing.
Note: Click Options to customize capture settings specific to your video device.
Tip: If you are capturing video from a DV or HDV camcorder, use the Navigation
Panel to play your videotape.