ACTS Hellenic HB Operating manual HB Manual de instructions H Bedienungsanieitung HB Manuela USO BH Manuel utilization ~~ B EURASIA Please keep this user manual safely, read It thoroughly and carefully before using this product.
Thank you for purchasing your new Ultrasonic Humidifier. The humidifier helps you to restore an appropriate level of humidity and eliminate the discomfort associated with dry air. We wish you many years of healthy indoor air with this efficient and effective product. Wa recommend you spend some time reading this instruction manual in order to fully understand all the operational features it offers. * Read all the safety instructions carefully before use and keep this instruction manual for future reference.
| Remote Control 5.BABY Mods 2.Mist Output Speed 6. Degerming a 8 3.Constant Humidity 7. Amblent Light 4.Night Mode 8.Timer Setting &telegenic * First use of remote control, the plastic tab should bs removed from the battery compartment. * How to replace the remote control battery 7 1.Remove the battery compartment by pinching the tab and pulling the compartment out as below replete. 2.Remove the old battery. 3. Replece with a new battery. Make sure they the polarities match. 4.
l Instructions For Usage Note: The position of the water tank mark "MAX" is the maximum filling level. Sie 1. Place the humidifier on a flat Bo tin tame! the top cover of the water surface and remove the tap to fill and then rectum cover. the tank to the main bases. 4. Check and make sure that the rated voltage matches the Input voltage, and then plug 1t Into the outlet. The display will show the Touch symbol ON/OFF “ ® ”, the panel will be lit up as well as the bottom atmosphere light.
[Mist Output Speed ist output symbol ® *, humidifier will work in the lowest speed with display showing symbolic“ MEE * AUTO mode Is exited. Touch again humidifier will work In middle speed with display showing® all * Touch again goes Into the highest speed with display showing ol * . Touch again to tun to AUTO mode. [Night Mode 1.Long press mist output symbol“ @ * about 2 seconds, display show the NIGHT mode symbol“. all background light will become dim. After about 10 seconds, the symbol“.
| BABY Mode 1.Touch the symbol BABY mode® "to enter BABY mode. a) Warm mist“ ” , PLASMA £3" are on. Display shows the BABY made symbol” € *, Humidifier starts to achieve humidity 55% at the highest speed. the humidity 556% Is achieved, the humidifier stop working. c). TIMER STING functions are operable In BABY mode. The humidifier checks the humidity level every 1 minute. | Bottom atmosphere light control 1.
How to clean the transducer: 1.Clean with clean water or citric acid if there is scale in it. 2.Brush off the scale from the surface. 3.Rinse the transducer with clean water. [How to clean ceramic filter 1.Clean and activate the ceramic ball filter after using 1000L water regularly. Depend on water quality. If ceramic ball is dirty, it needs to be cleaned more frequent. 2. It can be dipped in vinegar about 5 minutes. Then rinse it cleanly with clean water. 3.Then put filter under the sun for 4~6 hours.