Service manual

15
 

 
See Picture 33.
 
INSTALLATION NOTES:
 In designing the S&S® Super E and G carbs S&S has made every eort to keep overall assembled length as short as possible. Due to the short installed
length of the carb assembly, the air cleaner cover may contact the gas tank of four-speed shovelhead chassis. In such instances an optional chromed,
notched cover that will provide additional clearance can be ordered. See Picture 34, below right. If a new, undamaged Super E/G cover is shipped to
S&S prepaid, it will be exchanged for the dierence in cover prices. See your authorized S&S dealer for this service.
 An optional 1" spacer block can be installed between carb and manifold as an alternative, or existing air cleaner cover modied to provide 1⁄8" minimum
clearance.
 Bowl vent screw should be removed for any all-out racing application which includes use of air horn or air cleaner without lter element. Exposed passage
in carb body maintains equal pressure between oat bowl and atmosphere. See Picture 35, below left.
 On any application where air horn is used instead of air cleaner, S&S carb mounting bracket must be used to securely fasten carb to engine. See line
drawing on page 28.
Improperly mounted carburetor may loosen from engine resulting in gas or air leaks, poor performance and possible damage to
carburetor or other components.
Any gasoline leak represents a potential health and re hazard.
CAUTION
WARNING
Picture 33
Picture 34
Picture 35