Service manual

Extreme care must be taken to prevent metal chips from entering engine when elbow is removed. S&S® recommends packing breather

tting with grease before removing elbow. Metal chips inside engine will cause extensive damage. Installer bears all responsibility for

containment of chips and other debris.

2- Prepare Air Cleaner Backplate

NOTE: Fast idle lever screws must not be over tightened. Loctite® or other thread locking compound may be used sparingly on threads to prevent screws

from vibrating loose.

Over tightening fast idle lever screws may damage backplate.

 

 See Picture 5

   

See Picture 6

CAUTION

Picture 3

Picture 4

Picture 5

Picture 6

CAUTION