Service manual

7
3- Throttle Preparation
NOTE: Throttle grip assembly must be assembled correctly and work freely to prevent possible sticking during operation. Throttle must snap closed when
released. Cable routing must be free of tight bends to minimize friction between cable and housing.
If throttle does not work freely, it may inadvertently stick open possibly causing loss of control of motorcycle and personal injury to
operator or others.
 
 
 

 
 See Picture 11
 

  See Picture 11
 
 
 
 
 
 
 See Picture 11
 
4- Install New Manifold and Mounting Hardware
NOTE: When applicable, all carburetor mounting brackets and hardware supplied in kit must be installed to secure carburetor and air cleaner backplate
assembly or air horn rigidly to engine.
 Improperly mounted carburetor could loosen unexpectedly, resulting in air leak, poor performance and possible damage to engine or
carburetor.
 Incorrect combinations of mounting hardware may cause mounting bolts to bottom out in holes or inadvertently contact other parts
possibly causing damage to engine or carburetor components.
Improperly mounted carburetor may break free in event of collision or other vehicle accident creating a re hazard with potential
personal injury to operator/others.
WARNING
CAUTION
WARNING
Picture 11