Instructions

D1. Atrstsight

When switching on the Ultimaker, the main thing you will notice is that the display

lights up. You instantly get the mainscreen of the controller as shown in the image

bellow. First lets explain what you see and their functionalities

22D1. At rst sight Use of the Ultimaker controller display

1. Push wheel : You can navigate through the display by using the button. This button can

be pushed and rotated. By rotating you can select or control an action. By pushing you

can conrm an action. When pushing the button you hear a “beep” sound to conrm your

chosen action.

2. Nozzle temperature / Target temperature: The rst temperature ‘024°’ shows the

nozzle’s current temperature, the second temperature ‘000°’ is the target temperature. For

example when preheating the target becomes 024°/210°

3. FeedRate: This is the print speed of your machine, You can change this by rotating the

pushwheel (Number 1). Its recommended you leave this value on 100%, especially when

you are not an experianced user.

4. SD card indication: The note: ‘Card inserted’. is obvious, it means your SD-card is ins-

erted and is accessible. When you remove the card by pushing it, the menu will read ‘Card

removed’.

5. Print process indication: 000%SD keeps track of how far you are into you print. 000%

means you haven’t started, 100% means you print is nished.

6. Height 3D model: This shows you how much the z has moved down.

Optional:

7. Heated bed temperature / Target temperature: The rst temperature ‘020°’ shows the

nozzle’s current temperature, the second temperature ‘000°’ is the target temperature. For

example when preheating the target becomes 020°/65°