Instructions

A2.SpecicationoftheUltimakerOriginal
Printing
Print technology Fused lament
fabrication (FFF)
Build volume 21 x 21 x 20,5 cm
Layer resolution Ultra high
High
Medium
Low
Position precision X 12,5 micron
Y 12,5 micron
Z 1.875 micron
Filament diameter 2.85 mm (generally
known as 3 mm lament)
Nozzle diameter 0.4 mm
Print speed 30 mm/1 - 300 mm/s
Travel speed 30 mm/1 - 350 mm/s
Software
Software package Cura - Ocial Ultimaker
File types STL / OBJ / DAE / AMF
Supports Windows (XP 32 bit/7+)
Ubuntu Linux (12.04+)
Mac OS X (10.6 64bit +)
Connectivity Stand-alone printing
from SD-card
USB (rmware)
Physical dimensions
Frame Dimension X 35.7 cm
Y 34.2 cm
Z 38.8 cm
Operating dimension with UltiController,
spoolholder and the max height
lament guide tube X 54.4 cm
Y 34.2 cm
Z 56.5 cm
Temperature
Ambient Operating
Temperature 15°- 32° C
Storage Temperature 0° - 32° C
Operating nozzle
temperature 180° - 260°
Operating Bed
temperature 50° - 110°
Electrical
AC INPUT 100 – 240 V,
2.0 AMPS,
50 – 60 HZ
120 watt max.
Power Requirements 19V DC @ 6.32 AMPS
Electrical with heated bed
AC INPUT 100 – 240 V,
4.0 AMPS,
50 – 60 HZ
221 watt max.
Power Requirements 24V DC @ 9.2 AMPS
WARNING: The Ultimaker Original generates high temperatures and has hot moving parts that can cause
injury. Never reach inside of the Ultimaker Original while it is in operation. Always control the Ultimaker
Original from the push wheel on the UltiController or with the power-switch on the back. Allow the
Ultimaker Original to cool down for at least 5 minutes before reaching inside.
CAUTION: When opening the Ultimaker Original for service, ensure that the power supply is turned o
and the cord is disconnected from the wall socket.
CAUTION: Only use the power supply provided with your Ultimaker Original.
20 micron
60 micron
100 micron
200 micron
6A2.The Ultimaker experience Specication of the Ultimaker Original