Instructions

Step 5: Assembling the ‘cube’-shaped frame Assembling the frame 25
image 20: placing and folding the LONG cable duct and placing the RIGHT panel
(for action 15-20 see image 21)
15. Turn the Ultimaker Original on it’s RIGHT side.
16. Place the second SHORT cable duct on the LEFT side of the BACK
panel, fold it and tape it.
17. Place the second LONG cable duct on the LEFT side of the FRONT
panel, fold it and tape it.
18. Place the LEFT panel.
19. Attach the LEFT panel.
Use twelve bolts M3 x 16mm and twelve hex nuts 3mm.
20. Remove the blue Scotch tape.