Instructions

Step 6: attaching various parts Assembling the frame 27
21. Move the wires of the limit switches through the cable ducts.
5
Notice: try to guide the endstop cables behind the y motor.
22. Move the wires of the X- and Y motor through the cable ducts.
23. Complete the frame, see image 22.
Use twelve bolts M3 x 16mm.
Well done, the frame should look like this (see image 23).
image 23: result assembling the ‘cube’-shaped frame
6.1.6. Step 6: attaching various parts
The following parts are needed in this step.
Letter Description. Qnty.
A
wooden part 11A 1
B
wooden part 3A 2
C
bolts M3 x 16mm 6
D
hex nuts 3mm 4
E
lock nuts M3 2