Instructions

Step 4: Mounting the axes Assembling the X/Y axes42
- timing belt with ONE timing pulleys.
5. Put the timing belt in the FRONT slider block, see image 47.
6. Put the timing belt in the BACK slider block, see image 48.
7. Rotate the wooden end cap WITHOUT hole (BACK panel, LEFT) back
to its normal position.
8. Attach the wooden end cap WITHOUT hole with a bolt M3 x 16mm and
a hex nut 3mm.
image 46: attaching the LEFT axis.
image 47: attaching the FRONT slider block on the timing belt
image 48: attaching the BACK slider block on the timing belt