Instructions

Step 1: Assemble the extrusion head housing Assembling the extrusion head 51
12. Attach the black injection moulded part on the wooden part marked
TOP, see image 59.
5
Notice: pay attention to how the part is positioned.
Use ONE M3 x 12mm bolt and a hex nut.
image 59: attaching the black injection moulded part on the wooden part TOP
(for action 15-19 see image 60)
13. Put two bolts M3 x 16mm through the bottom side of the wooded part
marked TOP.
14. Place the acrylic mounting plate over the two bolts M3 x 16mm.
15. Place the amplifi er circuit board over the bolts M3 x 16mm.
16. Attach two threaded spacers over the two bolts M3 x 16mm.
17. Place the strain relief plate on top of the threaded spacers.
18. Lock by screwing two bolts M3 x 10 mm into the threaded spacers.
image 60: attaching the acrylic mounting plate, amplifi er circuit board and strain relief