Instructions

Step 3: attaching the housing on the XY frame Assembling the extrusion head56
6.3.3. Step 3: attaching the housing on the XY frame
The following parts are needed in this step.
Letter Description Qnty. Letter Description Qnty.
A
X and Y axes 2
D
wooden parts C 4
B
bolts M3 x 30mm 4
E
spacers 2
C
hex nuts 3mm 4
4 x 4 x 4 x
2 x
2 x
image 69: parts needed for this step
To attach the housing on the XY frame, perform the following actions.
1. Place a wooden part C into the LEFT slider block, see image 70.
5
Notice: do not tighten yet.
image 70: moving the wooden part C in the LEFT slider block.
2. Move X and Y axes in the extuder head, see image 71.
5
Notice: make sure the extruder head is placed inside the machine,
below the slider blocks.
A
B C D
E