Instructions

Step 3: attaching the housing on the XY frame Assembling the extrusion head 59
image 75: adjusting the timing pulleys
15. Move the X motor down en keep it in position.
5
Notice: push gently, do not overdo.
16. Tighten the bolts, see image 76
17. Repeat step 14 and 15 for the Y motor.
image 76: tightening the bolts of the X motor.
18. Move the extruder head all to the end of the X axis.
5
Notice: Make sure you hear the limit switch clicking.
If not: move the RED wired limit switch till the clicking sound occurs.
19. Tighten the RED wired limit switch.
20. Repeat step 19 and 20 for the BLUE wired limit switch.