Instructions

Step 2: inserting the adjustable level screws Assembling the Z stage 65
4 x
8 x
4 x
4 x
8 x
4 x
image 82: parts needed for this step
To insert the adjustable level screws, perform the following actions.
(for action 1-3 see image 83)
1. Place the delrins in each corner hole.
2. Attach the delrins.
Use two bolts M3 x 10mm and two hex nuts 3mm for each delrin.
3. Attach ONE spring and ONE washer together on each delrin.
Use ONE bolt M3 x 30mm.
5
Notice: do not bolt tight.
image 83: attaching the adjustable level screws
A
B
E
C D
F G