Instructions

Step 7: greas it up Assembling the Z stage72
image 95: Attaching the screws with a hex key
The frame is now ready!
6.4.7. Step 7: greas it up
The following parts are needed in this step.
Letter Description Qnty.
magnalube tube 1
To grease the leadscrew, perform the following actions.
1. Put a droplet of the supplied tube of grease on your finger (a volume
comparable with a Sportlife gum).
2. Spread the droplet across the ledscrew (on straight line from top to
down is fine).
5
Notice: the drive nut will spread the grease later, when the leadscrew
rotates.