Instructions

step 3: connecting the heater Mounting the electronics circuit board 91
6.6.3. step 3: connecting the heater
To connect the heater, perform the following actions.
1. Connect the WHITE wires of the heater element to the terminals of the
heater 1 output, see image 125.
5
Notice: do not strip the wires too much. This can cause short circuit.
5
Notice: do not strip the wires too short. This can cause no contact.
2. Attach the terminals.
Use a small screwdriver.
5
Notice: make sure the cable is secure.
image 124: connecting the heater