Instruction Manual

ManualsBrandsUltimate IOT Technology ManualsElectronicsTemperature and Humidity Sensor

1

UIOT/QR4120：1-5-02

" Temperature and Humidity Sensor"

Instruction Manual

UltimateIOT(Shanghai)Technology

Ltd.

R&Ddepartment

Document Marked

UIOT-YFB-DETAILDOC

Department Compiled

R&D department

Expiry Date

Documentrevisionhistory

Date Version Description Author Approver

V1.0 2018.11.10 Initialrelease YuHuaiFu

V1.1 2019.07.01

Modificationofnetworkaccesskeystructure

diagram

YuHuaiFu

Summary of content (6 pages)

PAGE 1
UIOT/QR4120：1-5-02 " Temperature and Humidity Sensor" Instruction Manual Ultimate IOT (Shanghai) Technology Ltd. R&D department UIOT-YFB-DETAILDOC R&D department Document Marked Department Compiled Expiry Date Document revision history Date Version V1.0 2018.11.10 V1.1 2019.07.
PAGE 2
Product description Appearance Product parameters  Color: Witer  Material: Flame retardant PC  Installation Method: Side/ Horizontal mount  Dimensions: 51×51×15mm  Power supply:Cell CR2032  Communication mode:Zigbee  Communication distance: 50~80m(No occlusion)  Temperature range: -10℃~40℃  Humidity range: 0-90%RH  Temperature accuracy: ±1℃  Humidity accuracy: ±5% ※ Under normal conditions, the battery can be used continuously for two years. The data are from uiot laboratory.
PAGE 3
Structure and installation Product panel diagram Installation product requirements  The mounting surface of this product shall be clean and tidy.  It can also be placed on the desktop.  Do not install outdoors. Installation steps  Pull off 3M adhesive protective film.  Fix the sensor on the wall or other objects with 3M glue.  When ZigBee network access is turned on, press the network access button with the card taking needle for more than 3 seconds, and the sensor will join ZigBee network.
PAGE 4
Installation precautions  There are fragile devices in the product. Please avoid falling, heavy pressure and other destructive actions.  The products are precision electronic devices. Pay attention to waterproof and avoid high temperature in use.  Do not let foreign matters fall into the machine.  Do not disassemble or refit the unit in any way.  When fixing the bottom shell, do not press hard to avoid damage to the shell.
PAGE 5
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 6
with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.