With included T-Stand adapter. Mounted on microphone stand (5/8" thread). Product Manual HyperStation QR LPT-1000 QR, 17510 HyperMount QR HYM-100 QR, 17511 HyperStation QR in standing position. HyperStation QR in folded position. LIMITED LIFETIME WARRANTY 800.525.5628 . www.ultimatesupport.com . Copyright 2013, Ultimate Support Systems .
HyperStation QR Instructions 1. 1. Loosen both knobs 3. 3. Tighten base knob. 5. 5. Loosen small arm knobs and adjust the arms to desired length. 2. 2. While holding base, move stand into an upright position. 4. 4. Swing arms around to the front and tighten upper knob when arms are in the desired angle. 6. 6. Adjust back bumper to desired angle. Angle will control the amount the screen tilts back.
Laptop Stand Instructions (Con.) 7. 7. Place computer into the support arms. 9. 9. While holding second tier at an angle, place into any of the five slots (front or back). 8. 8. Loosen front clamp and front bumper to secure laptop. 10. 10. Move the cable management clips to desired slots.
T-Stand Adapter Instructions (HyperStation QR & HyperMount QR) 1. 1. Loosen Knob, adjust rubber front foot down, while clamp is facing up, and tighten knob. 3. 3. Place included T-Stand Adapter into open post. 5. 5. Loosen knob and clamp laptop into place, then tighten knob. 2. 2. Pull down on QuickRelease post to disengage support arms (for HyperStation QR). 4. 4. Place laptop into position.
Mic Stand Instructions (HyperStation QR & HyperMount QR) 1. 1. Put QuickRelease bottom piece onto top of mic stand (5/8" thread). 3. 3. Pull down on QuickRelease bottom piece and place arms on top of mic stand, then release QuickRelease bottom piece to lock stand in place. 5. 5. Loosen knob and clamp laptop into place, then tighten knob. 2. 2. Pull down on QuickRelease post to disengage support arms (for HyperStation QR). 4. 4. Place laptop into position.
AX-48 Pro Laptop Mount Instruction (HyperStation QR & HyperMount QR) 1. 1. Screw QuickRelease bottom piece onto top of AX-48 Pro keyboard stand (must have optional AX-48TA Thread Adapter) . 3. 3. Pull down on QuickRelease bottom piece and place arms on top of mic stand, then release QuickRelease bottom piece to lock stand in place 5. 5. Loosen knob and clamp laptop into place, then tighten knob. 2. 2. Pull down on QuickRelease post to disengage support arms (for HyperStation QR). 4. 4.
HyperStation QR LPT-1000 QR, 17510 The HyperStation QR is a dynamic laptop stand for the working DJ and traveling musician. The HyperStation QR features angle-adjustable telescoping support arms that support laptops, small mixers, groove production electronics, drum pad controllers, and more and has a height-adjustable second tier. Mobile music production demands both portability and durability and the HyperStation QR delivers on both accounts.
Warranty Registration Visit www.ultimatesupport.com for a quick and convenient process for registering your new Ultimate Support product.Warranty Registration and Proof of Purchase are required for warranty fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and Support Plan details are available online under Music Gear & Instrument Stands / Customer Support. Revision 1, 08.26.12 .