Use and Care Manual

4 CONNECT TO TV VIA OPTICAL / AUX
OPTICAL
OPTION 1: OPTICAL
NOTE:
Make sure the TV's port is OPTICAL OUT.
lf audio is coming from the internal TV
speakers, mute or minimize the TV volume.
DIGITAL AUDIO
OUT
OPTICAL
OPTICAL
OPTICAL
AUX
OPTION 2: AUX
NOTE:
Connect the 3.5mm to RCA Audio Cable to
your TV's AUDIO OUT port.
Make sure the color of the cable ends
matches the color of the TV ports.
AUX
AUDIO OUTPUT
R
L
AUDIO IN
R
L
In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
6 CONNECT TO SUBWOOFER AND SURROUND SPEAKERS
Use the 6m RCA-RCA cables to connect the subwoofer
and surround speakers, please pay attention to match
the same color interfaces on the surround speakers
with the corresponding ones on the subwoofer and
place the surround speakers accordingly.
Use power cable to connect your subwoofer and power
port.
1
2
03
7 PAIRING SUBWOOFER
Step 1:
Press and hold the “ ” button on the remote
control for 3 seconds, the display will show “SUb” flashing.
Step 2:
Press and hold the ON/OFF button on subwoofer for 3
seconds, the white LED will be fast flashing.
The subwoofer has been paired with the soundbar
by ULTIMEA.
However you may need to re-pair the soundbar
and subwoofer if there is no sound coming from
the subwoofer.
1
2
1
2
5 CONNECT TO BLUETOOTH
NOTE:
Press the “ ” button on the soundbar or remote control to enter Bluetooth pairing mode.
Go to the Bluetooth setting on your phone, nd and select “Poseidon D60” to connect the soundbar.
Poseidon D60
Batteries not included
1
2
Note: If it’s already in the Bluetooth mode and connected, press and hold “ ” button for 3 seconds to disconnect current device and
choose to connect to new device manually on your mobile phone / PC / TV.
The white LED will be solid on when the subwoofer is paired
successfully.
Step 2Step 1
ON/OFF
AC IN
SR
SL
ON/OFF