User Manual Twin Subwoofer Powered in One Detachable Design Model No.: U3300 www.ultimea.
Content Accessories list 01 Interface 02 Remote Control 03 Installation Option 04 Wall Mount Installation 06 Connect to devices 07 Power supply 09 Connecting via Bluetooth 10 11 Trouble shooting 12 Safety Instructions 13
Accessories list Model No.
是非成败转头空 Interface Control Panel VOL+: Volume Up. VOL- : Volume Down. LED Display Power Button: Press to power on Press for 3 seconds to power off. SOURCE: Press to switch channel: ARC-BT-Optical-AUX-USB. Press for 3 seconds to switch to BT mode, and enter pairing mode.
Remote Control Accrute audio, lower volumes Powerful audio, higher volumes, 03
Installation Option 1 & 2 On table Detached and standing upright on either side of the TV Assem bled and placed under the TV 04
Installation Option 3 & 4 Wall mounted Detached and upright, m ounted on either side of TV wall. Assem bled and m ounted on the wall beneath the TV.
Wall Mount Installation Wall mounting: 06
Connect to TV 3.
Connect to other devices (Not included ) 3.
Power supply Turn On/Off The power adapter jack is connected to the soundbar DC in port, and then plugged into the power port. - Check whether the indicator light (white “ ” on the LED diplay) of the sound bar is on, if not, you need to press the power button on the side. The remote can also control the soundbar with the battery installed.
Connecting via Bluetooth Bluetooth Connection Press and hold the "SOURCE" button for 3s to enter Bluetooth pairing mode. Find and click the device name "ULTIMEA Apollo S40" to connect.
• Model No. : U3300 • • • Soundbar Transducer: 2.25”X2(Mid-low range) +2.25”X2(Mid-high range) • Frequency Response: • Standby power :<0.5W • Operating performance:0 ℃ ℃ • Bluetooth version: 5.0 • • • Dimensions ” • USB: Type A, Supports MP3, APE, FLAC, WMA, • • Weight: 2.5 Kg • • Format: MP3. • Other inputs: optical input X1, AUX inputX1 • Packaging weight (Gross weight): 3.
Trouble shooting • There is buzzing or humming noise may be with the or The remote doesn’t work • • • • Bluetooth Connect Failed • The soundbar is already connected with another Bluetooth device, disconnect the previously connected device. • Reboot your Bluetooth device and try to pair again with the soundbar. The connected Bluetooth device connects and disconnects nects constantly. The Bluetooth reception is poor. Replace the remote batteries with new ones.
Safety Instructions Please read this user manual carefully and save it for future reference. • Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil. compromise safety, regulatory compliance, system performance, and may void the warranty. • Avoid dropping. • Do not disassemble. • Do not submerge in water. or open flames. • The ideal operating temperature for this product and its accessories is • The adapter should be installed near the device and should be easily accessible.
FCC Regulatory Compliance ISED WARNINGS NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Declaration of Conformity We (Manufacturer is responsible for this declaration) (Company name) (Company address) declare under our sole responsibility that the product Trade name: ULTIMEA Equipment: SOUNBAR Model No.: U3300 to which this declaration relates is in conformity with the essential requirement set EN55032:2015 Full Name: Yoyo.