User`s manual

② Click ( ) Format frame to select EXE or JPEG. Choose EXE for storing moving images; and JPEG for still images.

③ Click ( ) the keyboard display on the right-hand side of FROM frame to set the storage start time.

④ Click ( ) the keyboard display on the right-hand side of TO frame to set the storage end time.

⑤ Click ( ) Destination frame to select a storage device out of USB and DVD-RW.

⑥ Click ( ) the keyboard display on the right-hand side of File Name frame to input a file name. You do not need to input

extension (exe, jpeg). Please note that the file is not going to be stored unless you input a name.

⑦ Check 5 a check box next to a camera with the video you want to store. You can archive multichannel at the same time.

⑧ Click ( ) the Calculator button

on the rightmost side of Format line to check the data capacity for backup.

The capacity will show only for EXE Archive.

⑨ Click ( ) Start button. Then, Progress bar will appear and the storage process proceeds. The progress bar does not

show actual progress time. Depending on to the file size, it will appear again even after it shows 100%. It is important not

to detach storage device until DVR displays “Archive Success” message.

⑩ If the storage is done properly, Archive Success message will pop up. Please choose ‘OK’ to confirm. If the storage fails,

Archive Fail message will pop up. In this case, you must try again.

5.6 Color Control and Position

y Please click ( ) Color /Alarm in SEARCH menu and the following input box will appear.

(NOTE)

WHEN THE TARGET FILE SIZE IS OVER 2GB, PRESS “

” BUTTON ON THE RIGHT AGAIN AFTER THE FIRST “ARCHIVE

SUCCESS”. AND DVR WILL CONTINUE TO ARCHIVE TO ANOTHER FILE WITH THE EXTENSION OF “-002” AUTOMATICALLY

ADDED. IN CASE OF DVD MEDIA, CHANGE IT AFTER THE FIRST FILE IS FINISHED AND PRESS “

” TO CONTINUE TO

THE REST OF PROGESS.

(NOTE)

THIS FUNCTION IS ENABLED ONLY WHEN LIVE MODE AND 1 CHANNEL MODE

CAUTION

WHILE BACKUP, PLEASE DO NOT DETACH STORAGE DEVICE OR POWER OFF THE DVR. OTHERWISE, IT MAY CAUSE

PERMANENT DAMAGE TO THE DVR OR THE STORAGE DEVICE. IN SUCH CASE, YOU MUST REBOOT THE DVR. IF THE

DVR DOES NOT OPERATE PROPERLY, YOU MIGHT NEED FILE SYSTEM RECOVERY PROGRAM OR YOU MUST FORMAT

HDD.

CAUTION

PLEASE DO NOT USE THE SPACE IN BACKUP’S FILE.

(NOTE)

PLEASE DO NOT CHANGE THE SETTINGS BY DVR OR CMS, WHILE BACKUP.

(NOTE)

PLEASE DO NOT USE JPEG FORMAT SELECTING WHILE ARCHIVING IN LIVE MODE.