301-8775 ACTIVE WEATHERIZED OUTDOOR SPEAKERS Instruction Manual Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
FCC NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specification Bluetooth Distance: 39' Power Output 30W+30W RMS Frequence Response 80Hz - 20KHz Impedance 8Ω Sensitivity 89dB ± 3dB Woofer 5.25” Tweeter 0.75” Silk Dome Product Dimension (1 Speaker) 9.6”H x 7.
Installation These outdoor speakers are manufactured to resist a variety of weather conditions. Snow, rain and sun (not to be submerged under water). For durability / longevity we do recommend removing the speakers from the brackets and placing inside during extended extreme temperatures over 120 degrees Fahrenheit and below 0 degrees Fahrenheit. The most ideal place to install these speakers is under the overhangs as they provide the best protection.
When connecting the speakers, it is very important to observe the correct polarity. This means that the wire attached to the (+), red, or positive terminals on one component must be attached to the (+), red, or positive terminal on the corresponding component speaker output terminals. Similarly, the (-), Black, Negative or ground terminals must connect to the respective (-), Black, Negative, or ground terminals. This is easy to do by locating the color stripes that appears on the included speaker wire.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.