Specification

UPlay Today™ Product Specications

General System Specications:

UPlay Today™ features 3

1/2

” O.D. uprights with a high-strength aluminum alloy clamp fastening system

nished with a polyester powder-coat. All uprights shall receive factory installed deck clamps located at the

appropriate deck heights.

All decks and components shall connect using the aluminum clamping system. All climbing attachments

shall include either upright-mounted grab bars or a 15” wide deck entry archway to control deck access to

one child at a time and help prevent inadvertent falls.

UltraPlay shall oer the following warranties on the materials and components of the UPlay Today™ playsys-

tems:

• 10-Year limited warranty on support posts (uprights)

• 5-Year limited warranty on metal parts including decks, pipes, rails, loops and rungs

• 3-Year limited warranty on rotationally molded polyethylene components

• 1-Year limited warranty on all hardware and all UltraPlay products in general

Clamps

All clamps are die cast, high-strength 102 aluminum and are powder-coated to match the post color. Fas-

teners for clamps are stainless steel special tamper-resistant pinned bolt with locking patch, and a heavy

hex locknut, which ts into either a hex or round shaped recess, cast into the clamp. The pinned bolt head

requires a special tool for fastening (provided with each structure), thus ensuring vandal-resistance.

Plastisol Coating

All metal deck platforms, steps and stairs are plastisol-coated. Each part is chemically washed and com-

pletely submerged in a special heat-activated primer and allowed to dry. Parts are then pre-heated and

immersed in liquid polyvinyl-chloride (plastisol). The PVC coating shall have a nominal thickness of .080” and

a hardness of Shore A 83 +/-5 normal durometer range. This material is classed as “Self Extinguishing”, meets

or exceeds automotive specications NVSS302, and contains ultraviolet inhibitors to help prolong the life of

the coating. Standard color is brown. The following characteristics apply:

Tensile Strength - 2,800 psi

Elongation - 290 %

Tear Strength - 420 lbs/in

This product meets or exceeds the heavy metal requirements of the CPSIA Act of 2008.

Powder-Coating Process

Powder-coat shall be an electrostatically applied formula of polyester powder. All components will be free

of sharp edges and excess weld spatter and shall be cleaned in an iron phosphate wash, as a rust inhibitor,

and a sealer to prevent ash rusting before coating. The coating shall have a super tough nish with maxi-

mum exterior durability and will have superior adhesion characteristics.

PAGE 1
UPlay Today™ Product Specifications General System Specifications: UPlay Today™ features 31/2” O.D. uprights with a high-strength aluminum alloy clamp fastening system finished with a polyester powder-coat. All uprights shall receive factory installed deck clamps located at the appropriate deck heights. All decks and components shall connect using the aluminum clamping system.
PAGE 2
Rotationally Molded Plastics All Rotationally Molded Products are manufactured from medium density polyethylene (UV-stabilized color). The tensile strength of this material is to be 2500 PSI as defined by ASTM D638. The nomimal wall thickness will be .250” (¼”).