Instructions / Assembly

ManualsBrandsUltra Play ManualsOutdoorsUPlay Today Commercial Playground Galvanized Freestanding Crawl Tunnel In-Ground Kit

MODEL # 02-07-0057

ASSEMBLY INSTRUCTIONS

03-05-14

Summary of content (6 pages)

PAGE 1
MODEL # 02-07-0057 ASSEMBLY INSTRUCTIONS 03-05-14
PAGE 2
MOUNTING OPTION 1 Footing Detail for Installations Placed on Ground Level U-shaped Support Post 4lb Hammer Footer U-shaped Support Post (B) SURFACING (3) Ground Spikes GROUND Instructions: 1. With Footers in position, secure each footer to the ground using Footer (3) ground spikes. NOTE: A 4 lb. hammer may be required to drive spikes into the ground. IMPORTANT: Never install play equipment over hard, unresilient surfaces such as asphalt, concrete or compacted earth.
PAGE 3
MOUNTING OPTION 2 Footing Detail for Installations Requiring Concrete Footers U-shaped Support Post Footer U-shaped Support Post (B) SURFACING Footer (3) 3/8” x 1-1/4” Machine Bolts GROUND Footer Instructions: 1. Bolt Footer and Inground Footer together using (3) 3/8” x 1-1/4” Machine Bolts and (3) 3/8” Hex Nuts.
PAGE 4
MOUNTING OPTION 2 DETAIL 12"(305mm) Diameter x 18”(457mm) Deep Holes (4 ) Places 32”(813mm) 56-11/16”(1440mm) 46-13/16”(1189mm) NOTE: Hole depths indicated on all ground plans are measured from the finished surface. See Footing Details. All Footer dimensions are based on level finished surface. Concrete Required : Approx. .18 Cubic Yards (.14 Cubic Meters) NOTE: Suggested Min.
PAGE 5
ATTACH FOOTER POSTS TO CRAWL TUNNEL AND FOOTERS 1. Lower U-shaped Support Post(B) behind flange of Crawl Tunnel(A). Parts List Letter Description Quantity A Crawl Tunnel 1 B Support Post 2 Footer 4 C Hardware Complete 1 14 D 5/16” x 1-1/2” BHCS Bolt 14 5/16” Barrel Nut E 3/8” x 1-1/2” BHCS Bolt 4 F 4 G 3/8” Hex Nut 2. Insert Bolt(D) through center hole in Crawl Tunnel(A), into Support Post(B) and secure with Barrel Nut(E). NOTE: Lightly tighten Bolts(D) until all Bolts(D) have been inserted. 3.
PAGE 6
SECURE CRAWL TUNNEL TO GROUND ABOVE GROUND INSTALLATION For Above Ground installation using Ground Spikes(A), refer to Mounting Option 1 on page 2. Parts List Letter Description Quantity A Ground Spikes 12 B In-Ground Footer 4 Hardware Complete 1 C 12 3/8” x 1-1/4” Machine Bolt D 3/8” Hex Nut 12 Part Number 02-07-0048 02-07-0049 33-12-0058 33-05-0019 33-01-0002 A or IN-GROUND INSTALLATION For In-Ground installation using the In-ground Footer(B), refer to Mounting Option 2 on pages 3 and 4.