Use and Care Manual

USE & CARE INSTRUCTIONS
INSTALLATION
A bad installation can derail any great product. During the installation process, please make
note of safety warnings and follow installation instructions closely. Installation instructions
include a specifications sheet which list every part used in the product and can make the
requesting of replacement parts more seamless.
FREQUENCY
Equipment should be checked for wear, loose hardware or vandalism at least every 6
months. Depending on the location of the equipment (i.e., high-use areas) it may need to be
inspected more frequently. Damage caused by wear or vandalism can be major factors in
injury causing situations. If a part is broken or worn, it should be replaced immediately.
FINISHES & MATERIALS
All equipment should be free of rust and should be repaired whenever necessary to deter
further rusting and damage. Wood and Recycled Wood products should be inspected for
splitting, splinters or stain fading.
HARDWARE
Proper maintenance of equipment requires regular tightening of all bolts, nuts, and
setscrews. All protruding bolts should be covered or cut off and finished smooth. Sharp
edges on pipes should be capped or removed.
MODIFICATIONS
Adaptations or modifications to the product in the field could create a safety concern and
can void the warranty. If the product is damaged, please contact Customer Service for
assistance.
CLEANING
Products can be wiped down with a mild cleaner like Simple Green or just soap and water.
Regular maintenance is necessary in this and all park and recreational equipment to
insure the safety of the user.