Instructions / Assembly

05/22/13
4FT. STRAIGHT SLIDE 02-07-5004
uPLAY TODAY
800.458.5872
www.ultraplay.com
2
8. Attach Slide Hood to Panel Clamp using M8 x 20mm B.H.C.S. and M8 Barrel Nut. See Detail 061.
9. Close Panel Clamps around Uprights and secure using M8 x 25mm B.H.C.S. and M8 Lock Nut. See Detail 025. (Do not install
Clamp Rivet until entire unit is assembled.)
10. Plumb and level entire assembly before tightening all fasteners. NOTE: Apply Loctite to threads of Bolt to prevent from loosening.
MAINTENANCE PROCEDURE:
Periodically check hardware for tightness, and tighten as necessary. Always check all parts for breakage or wear, and immediately
put equipment out of service until any faulty parts found are repaired or replaced. Also Check all metal parts for rust, paint loss and
touch-up if necessary with paint. Check for welded areas and verify integrity. Check periodically resilient surfacing for appropriate
depth and remove extraneous materials that could cause injury, infection, or disease. Maintain detailed installation, inspection,
maintenance, and repair records for each public-use playground equipment.
SLIDE HOOD
(02-07-0025)
STRAIGHT SLIDE
(02-07-0026)
025
061
060
058
UNDERNEATH
014
UNDERNEATH
036
UNDERNEATH
057
UNDERNEATH
MOUNTING BRACKET
(02-07-0045)
UNDERNEATH
EXTENSION TUBE
(02-07-0044)
UNDERNEATH
FOOTER PLATE
(02-07-0046)
UNDERNEATH
059
BEHIND
= IN
STALLAT
ION DETA
IL
COMPONENTS SHOWN IN
HIDDEN LINES ARE SOLD SEPARATELY
FINISHED ASSEMBLY