Specification

800-45-ULTRA
www.ultraplay.com
BARK PARK PRODUCT SPECIFICATIONS
Bark Park
Seats & Back: 11 gauge die formed angle frame 1”x1-7/8” with 3” radius corners. Seat and back plates are fabricated from a 12ga
plate. Holes are precision punched at 5/8” diameter. 7 gauge x 1-1/2” flat bar center support and mounting bracket understructure.
Electrically MIG welded.
Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic. Fluidized bed coating application with superior
mechanical performance, impact resistance and UV-stability.
Frame: 2-3/8” O.D. x 12 gauge pre-galvanized structural steel tubing. Seat/back support is bent over a mandrel through the bend radius
producing a wrinkle free bend. Tube ends are pre-galvanized steel capped. Seat mounting points are 7 gauge x 1-1/2” die stamped
steel flat bar. Cross braces are 1.029 O.D. x 15 gauge pre-galvanized structural steel tubing. All electrically MIG welded.
Frame Coating: Electrostatic powder coated application oven cured.
Hardware: All stainless steel hardware fasteners.
Dimensions: 6’ bench portable with back. Seats and back are 12” wide x 72” long. Seat height is 18”, seat back height is 35”. Total
depth of seat with back is 22-1/4”.
BARK-940P-P6
6/27/2012 Page 6 of 11