Instructions / Assembly

Issued/Revised: 08/29/13
UP164F CARDIO WALKER (FOOTING)
FitTech
800.458.5872
www.actionfitoutdoors.com
3
ActionFit
UP164I CARDIO WALKER (IN GROUND)
UP164S CARDIO WALKER (SURFACE)
CARDIO WALKER
(206520)
BASE COVER
(206700)
FINISHED ASSEMBLY
MAINTENANCE PROCEDURE:
Periodically check hardware for tightness, and tighten as necessary. Always check all parts for breakage or wear, and immediately
put equipment out of service until any faulty parts found are repaired or replaced. Also Check all metal parts for rust, paint loss and
touch-up if necessary with paint. Check for welded areas and verify integrity. Check periodically resilient surfacing for appropriate
depth and remove extraneous materials that could cause injury, infection, or disease. Maintain detailed installation, inspection,
maintenance, and repair records for each public-use playground equipment.