Installation Guide

Issued/Revised: 08/30/13
UP171F ELLIPTICAL (FOOTING)
FitTech
800.458.5872
www.actionfitoutdoors.com
3
ActionFit
UP171I ELLIPTICAL (IN GROUND)
UP171S ELLIPTICAL (SURFACE)
FINISHED ASSEMBLY
BASE COVER
(206700)
ELLIPTICAL
(206581)
MAINTENANCE PROCEDURE:
Periodically check hardware for tightness, and tighten as necessary. Always check all parts for breakage or wear, and immediately
put equipment out of service until any faulty parts found are repaired or replaced. Also Check all metal parts for rust, paint loss and
touch-up if necessary with paint. Check for welded areas and verify integrity. Check periodically resilient surfacing for appropriate
depth and remove extraneous materials that could cause injury, infection, or disease. Maintain detailed installation, inspection,
maintenance, and repair records for each public-use playground equipment.