Service manual

Ultraview 1500/1600 Monitors — Service Manual
4-6
2. Clear errors by then selecting c.
3. The log can be printed as well as displayed and cleared via the Service Functions menu.
90363 Display Adjustments
Brightness and Contrast
To adjust the brightness and contrast:
1. Power ON the monitor.
2. At the Main menu, touch the MONITOR SETUP key, MONITOR CONFIG key, and then the
BRIGHTNESS CONTRAST key.
3. Touch the brightness up and down arrow keys and the contrast up and down arrows to
adjust the display view.
Display Alignment
1. At the Main menu, touch MONITOR SETUP, and then touch PRIVILEGED ACCESS.
2. Enter the password using the on-screen keyboard and touch ENTER.
3. Touch the MORE key.
4. Touch SERVICE FUNCTIONS.
5. Touch MONITOR CALIBRATION.
6. Touch CRT POSITION.
The display will show the following:
Figure 4-1: CRT positioning
!
• Prior to clearing logged errors, always generate a printout of the CMOS error log
and attach it to the monitor’s PM record.
CAUTION:
• Avoid dimming the keys to the point that they are invisible. If this happens,
before exiting the menu or powering OFF the unit, turn the brightness up by
touching the place where the brightness and contrast up arrows should be.
BORDER