Service manual

Maintenance
4-11
Top Cover Removal
1. Remove the AC cord and retainer from the display assembly.
2. Refer to Figure 4-2 for the location of two screws on the bottom of the display.
3. Remove these two screws.
4. Using a soft cloth to protect the CRT face from scratching, lay the monitor on its face to
enable you to remove the two cover screws.
Figure 4-2: Location of the screws
5. Return the monitor to its normal position.
6. Remove the CRT top cover using the top cover removal tool (P/N 003-0085-00).
a. Locate the two latches that hold the bezel and top cover together (Figure 4-3).
b. Position the top cover removal tool next to the two latches (Figure 4-3).
c. Firmly push down on the top of the rear cover near the bezel and insert the removal tool
between the bezel and top cover as far as possible.
d. Slide back the rear cover from the bezel by grasping the cover on both sides and
sharply pushing in and back.
bottom view