Specifications

8.40 WRITE (6) (0Ah)
LINKFLAGReserved = 0VU=05
Transfer Length4
Logical Block Address
(LSB)
2
3
(MSB) LBAReserved = 01
Command Code = 0Ah0
01234567
Bit
Byte
Figure 169. WRITE (6)
The WRITE command requests the drive to write the specified number of blocks of data from the initiator
to the medium starting at the specified logical block address.
Logical block address
This field specifies the LBA at which the write operation shall begin.
Transfer length
This field specifies the number of blocks to be transferred. A value of zero implies 256
blocks are to be transferred.
Ultrastar 146Z10 hard disk drive specifications
166