Specifications

8.5.1.4 Inquiry data format - EVPD = 1 - Page Code = 80h
Serial Number (ASCII)4-19
Page Length = 16 (10h)3
Reserved = 02
Page Code = 80h1
Peripheral Device Type = 0Qualifier = 00
01234567
Bit
Byte
Figure 61. INQUIRY DATA - EVPD = 1 (Page Code = 80h)
! Qualifier is set to zero to indicate that the LUN specified in the Command Block is currently
supported.
! Peripheral Device Type is set to zero to indicate that the device is Direct Access.
! Page Code is set to 80h, and this field contains the same value as in the page code field of the
INQUIRY command descriptor block.
! Page length is set to 16; this field specifies the length of the following page data.
! Serial Number gives the drive serial number right aligned.
Ultrastar 146Z10 hard disk drive specifications
62