Instruction manual

Page 163
P812 General Control or Pump Messages
This parameter determines whether notification messages are displayed on
the auxiliary line of the display in run mode when a pump relay is switched
on or off. The message is in the form “General 1 ON”, where the number
displayed is the number of the relay.
Option
Description
0 = No (Default
)
Pump messages
will not
be displayed
1 = Yes
Pump messages
will
be displayed
P813 Control Messages
This parameter determines whether notification messages are displayed on
the auxiliary line of the display in run mode when a control relay is switched
on or off. The message is in the form “Time ON”.
Option
Description
0 = No
(
Default)
Control messages
will not
be displayed
1 = Yes
Control messages
will
be displayed
P814 Miscellaneous Messages
This parameter determines whether notification messages are displayed on
the auxiliary line of the display in run mode when a miscellaneous relay is
switched on or off. The message is in the form “Clock ON”.
Option
Description
0 = No (Default)
Misc. messages
will not
be displayed
1 = Yes
Misc. messages
will
be
displayed
P816 Totaliser ( R )
When Ultra Wizard = 3 Flow
This parameter determines whether or not the resettable totaliser will be
displayed in the auxiliary line of the display in run mode. When selected the
auxiliary display will scroll between the resettable totaliser and the totaliser
units selected. Default = 0 (Off).
The resettable totaliser can be reset while in run mode via the “Totaliser”
hot key
by pressing “0” while Total (R) is displayed.