Instruction manual

Page 165
P824 Totaliser Enable
This parameter determines if the totaliser is enabled or not, the options are
as follows:
Option
Description
0 = Off
Totaliser
will be
disabled
1 = On (Default)
Totaliser
will be
enabled
Bargraph
When Ultra Wizard = 3 Flow
P829 Bargraph
By default the bargraph will be representative of, as a percentage, the
reading obtained, as determined by the Mode P100. This parameter is
automatically set to the correct default option when selecting the Mode
P100, but can be changed if required. The options are as follows:
Option
Description
1 = Level
Bargraph
will be r
epresentative
of
level
.
2 = He
ad (Default)
Bargraph
will be
representative
of
head
.
3 = Flow
Bargraph
will be
representative
of
flow
.