Instruction manual

Page 194
OCM (When Ultra Wizard = 3 F LOW )
PMD Setup
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P700 PMD Type 0 = Off
P701 Primary M.D 1 = Off
P702 Calculation 2 = Ratiom.
P703 Minimum Head 0.000 inches
P704 Maximum Head 95.472 inches
P705 Maximum Flow 0.0000 USG
P706 Volume units 6 = Mil.USG
P707 Time Units 4 = per day
P708 Flow Decimal 2
P709 Flow Cutoff 5.00%
Dimensions
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P710 Dimension “A” 0
P711 Dimension “B” 0
P712 Dimension “C” 0
P713 Dimension “D” 0
P714 Roughness Coefficient 0.0000mm
P715 Water Temperature 15
o
C
P717 Exponent 0
P718 K Factor 0
P719 ThroatWidth 1 = 1 inch
Calculations
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P720 Area Read Only
P721 Cv Read Only
P722 Cd Read Only
P723 Ce Read Only
P724 Cu/Cs Read Only
P725 Kb Read Only