Instruction manual

Page 197
D ISPLAY
Options
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P800 Display Units 1 = measured
P801 Decimal Places 2
P802 Display Offset 0.000 feet
P804 Display Conversion 1.000
Fail Safe
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P808 Fail Mode 1 = Known
P809 Fail Time 2.0 mins
Auxiliary
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P810 Units 1= Yes
P811 Alarms 0 = No
P812 Pumps/General 0 = No
P813 Control 0 = No
P814 Miscellaneous 0 = No
P816 Totaliser (R) 0 = No
Bargraph
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P829 Bargraph 1= Level
Totaliser (When Ultra Wizard = 3 Flow)
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P820 Totaliser Tot 0.00
P821 Totaliser ( R ) Tot 0.00
P822 Totaliser Decimal Place 2
P823 Totaliser Multiplier 10 (1000000)
P824 Totaliser Enable 1 =On